hospital equipment

Product Details:

Infant radiant warmers are overhead heating units. A heat source, a skin-temperature sensor, an automatic (servo) control unit, and visual and aural alarms are usually included. They generate a large amount of radiant heat energy. They help limit conductive losses by enclosing the baby in a warm microenvironment.

Product Details:

Packaging Details 

• Paperboard is a paper-based material that is lightweight, yet strong. It can be easily cut and manipulated to create custom shapes and structures. These characteristics make it ideal to be used in personalized packaging. It is made by turning fibrous materials that come from wood or from recycled waste paper into pulp, and then bleaching it. Paperboard packaging comes in various grades, each suitable for different packaging requirements.

Silent Features :

Easy To Use
As technology advanced, we have kept the Warmer simple & easy to use with touch controls.

Focused Heating
The heater with reflector makes it easier to work with the baby by efficiently providing even heat distribution across the cradle and not into the surrounding environment.

Air Control Mode
Air control is an electronic feedback system which functions as a thermostat to maintain a constant temperature of baby cradle by regulating the heat output of Radiant Warmer. It Also acts as a WATCH DOG as Air over temperature cuts off heater even if the Warmer is operating in servo mode.

Manual Mode
The Manual mode allows the Warmer to be kept ready without nuisance alarms. When needed the Warmer provides safe, powerful & controlled warming to restore the temperature drop experienced by the baby immediately after delivery.

Servo Control Mode
Servo control is an electronic feedback system which functions as a thermostat a constant temperature at the site of skin probe by regulating the heat output of Radiant Warmer maintaining a constant abdominal Skin temperature between 36.5 & 37.0 C is the simplest way to provide a "Thermoneutral environment, minimizing the no. of calories needed to maintain normal body temperature & reducing the risks of cold stress or overheating. Servo control is the only acceptable method of heat regulation for the infant cared for under a Radiant Warmer.

Infant Warmer(Skin/Manual)

• Skin temperature displayed on 1 "bright Red LED display".
• Set temperature displayed on separate bright red LED display.
• Two modes of warming I.e. Skin, Air & Manual.
• Heater output in 10 equal steps in percentage.
• Programmable Heater power &Time in Manual mode.
• Individual LED for selection for mode (Skin, Air& Manual).

Additional Features :

• APGAR timer / attend baby alarm
• Programmble Mute Time

Product Details:

Packaging Details 

• Paperboard is a paper-based material that is lightweight, yet strong. It can be easily cut and manipulated to create custom shapes and structures. These characteristics make it ideal to be used in personalized packaging. It is made by turning fibrous materials that come from wood or from recycled waste paper into pulp, and then bleaching it. Paperboard packaging comes in various grades, each suitable for different packaging requirements.

Silent Features :

Easy To Use
As technology advanced, we have kept the Warmer simple & easy to use with touch controls.

Focused Heating
The heater with reflector makes it easier to work with the baby by efficiently providing even heat distribution across the cradle and not into the surrounding environment.

Air Control Mode
Air control is an electronic feedback system which functions as a thermostat to maintain a constant temperature of baby cradle by regulating the heat output of Radiant Warmer. It Also acts as a WATCH DOG as Air over temperature cuts off heater even if the Warmer is operating in servo mode.

Manual Mode
The Manual mode allows the Warmer to be kept ready without nuisance alarms. When needed the Warmer provides safe, powerful & controlled warming to restore the temperature drop experienced by the baby immediately after delivery.

Servo Control Mode
Servo control is an electronic feedback system which functions as a thermostat a constant temperature at the site of skin probe by regulating the heat output of Radiant Warmer maintaining a constant abdominal Skin temperature between 36.5 & 37.0 C is the simplest way to provide a "Thermoneutral environment, minimizing the no. of calories needed to maintain normal body temperature & reducing the risks of cold stress or overheating. Servo control is the only acceptable method of heat regulation for the infant cared for under a Radiant Warmer.

Infant Warmer(Skin/Manual)

• Skin temperature displayed on 1 "bright Red LED display".
• Set temperature displayed on separate bright red LED display.
• Two modes of warming I.e. Skin, Air & Manual.
• Heater output in 10 equal steps in percentage.
• Programmable Heater power &Time in Manual mode.
• Individual LED for selection for mode (Skin, Air& Manual).

Additional Features :

• APGAR timer / attend baby alarm
• Programmble Mute Time

Product Details:

Infant radiant warmers are overhead heating units. A heat source, a skin-temperature sensor, an automatic (servo) control unit, and visual and aural alarms are usually included. They generate a large amount of radiant heat energy. They help limit conductive losses by enclosing the baby in a warm microenvironment.

Product Details:

Packaging Details 

• Paperboard is a paper-based material that is lightweight, yet strong. It can be easily cut and manipulated to create custom shapes and structures. These characteristics make it ideal to be used in personalized packaging. It is made by turning fibrous materials that come from wood or from recycled waste paper into pulp, and then bleaching it. Paperboard packaging comes in various grades, each suitable for different packaging requirements.

Silent Features :

Easy To Use
As technology advanced, we have kept the Warmer simple & easy to use with touch controls.

Focused Heating
The heater with reflector makes it easier to work with the baby by efficiently providing even heat distribution across the cradle and not into the surrounding environment.

Air Control Mode
Air control is an electronic feedback system which functions as a thermostat to maintain a constant temperature of baby cradle by regulating the heat output of Radiant Warmer. It Also acts as a WATCH DOG as Air over temperature cuts off heater even if the Warmer is operating in servo mode.

Manual Mode
The Manual mode allows the Warmer to be kept ready without nuisance alarms. When needed the Warmer provides safe, powerful & controlled warming to restore the temperature drop experienced by the baby immediately after delivery.

Servo Control Mode
Servo control is an electronic feedback system which functions as a thermostat a constant temperature at the site of skin probe by regulating the heat output of Radiant Warmer maintaining a constant abdominal Skin temperature between 36.5 & 37.0 C is the simplest way to provide a "Thermoneutral environment, minimizing the no. of calories needed to maintain normal body temperature & reducing the risks of cold stress or overheating. Servo control is the only acceptable method of heat regulation for the infant cared for under a Radiant Warmer.

Infant Warmer(Skin/Manual)

• Skin temperature displayed on 1 "bright Red LED display".
• Set temperature displayed on separate bright red LED display.
• Two modes of warming I.e. Skin, Air & Manual.
• Heater output in 10 equal steps in percentage.
• Programmable Heater power &Time in Manual mode.
• Individual LED for selection for mode (Skin, Air& Manual).

Additional Features :

• APGAR timer / attend baby alarm
• Programmble Mute Time

Product Details:

Product Detail :

• Adopting oil-free piston pump
• Clean-without pollution of oil and smoke 
• Convenient-no need add oil to maintain daily
• Safe-no plus pressure during using
• No flow backwards pressure when the machine stops, so the liquid won’t flow backwards
• Complete plastic panels, hand-switch and foot-switch for operating easily. Select negative pressure at will with no level for pressure adjustment, and overflow protection mechanism, safe and reliable 
• Not suitable for continuous use in the induced abortions and for the inflammable or explodable surroundings.

Product Details:

• With CE Certificate, meets EU clinical safety Requirement
• Large 8.4" LCD color touchscreen, monitoring of waveforms and parameters in different colors
• IPPV, Pressure and SIMV modes can easily meet clinical requirements
• 4/6 tubes of flowmeters for 2/3 - gas sources and suitable for various operation requirements
• Spirometery loops, for easier interpretation of ventilation effectiveness
• Optional multi-gas monitoring provides more reference for anesthesia
• Optional AGSS provides more protection

Product Details:

• With CE Certificate, meets EU clinical safety Requirement
• Large 8.4" LCD color touchscreen, monitoring of waveforms and parameters in different colors
• IPPV, Pressure and SIMV modes can easily meet clinical requirements
• 4/6 tubes of flowmeters for 2/3 - gas sources and suitable for various operation requirements
• Spirometery loops, for easier interpretation of ventilation effectiveness
• Optional multi-gas monitoring provides more reference for anesthesia
• Optional AGSS provides more protection

Product Details:

PRODUCT DESCRIPTION 
Beyond Infusion Pump BYS-820 has disposable infusion sets used with this product shall comply with the standards of GB 8368-2005 Infusion Sets for Single Use, Gravity Feed. The infusion sets which do not comply with the standards may lead to the incorrect infusion rate, incontrollable transfusion, tube breakage, etc. 
 FEATURES

• HD LCD Display, high capacity words, friendly user interface, dynamically display working status;
• Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents;
• Compatible with any brands of infusion sets after correct calibration;
• Preset solution volume to greatly reduce the workload of nurses;
• Work mode: ml/h and drop/min can switch freely;
• Three levels of occlusion: high, middle and low;
•  Purge function;
• KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 3ml/h;
• Power Source: AC100---240V, 50/60Hz; Internal Battery;
• Automatically record the settings of last infusion;
• BYS-820D can store 2000pcs of infusion records and it has a drug library.
• OEM is available.

APPLICATION / MODEL
This instrument is applied in internal medicine, surgical, pediatrics, obstetrics and gynecology, ICU, CCU, operation room and other clinical infusion treatment (but not suitable for blood transfusion). It is especially suitable for clinical treatment that needs long-time accurate control of infusion rate and supervision of infusion processes. PRODUCT SPECIFICATION 
 Model: BYS-820 & BYS-820D
Infusion Rate : 1ml/h---1200ml/h (1ml/h step)
Purge Rate : 100ml/h---1200ml/h (can be calibrated)
Rate Accuracy : within±5% (after correct calibration)
Volume Limit : 0ml---9999ml
Total Infusion Volume : 0---9999.9ml
Alarm Pressure

• High 800mmHg±200mmHg (106.7kPa±26.7kPa)
• Medium 500mmHg±100mmHg (66.7kPa±13.3kPa)
• Low 300mmHg±100mmHg (40.7kPa±13.3kPa)

Audible and Visible Alarm

• End of injection
• Occlusion
• Door open
• Bubbles in the tube
• Wrong setting
• Low battery
• AC power pulled out

Power Source

• 100---240Vac, 50/60Hz
• Internal rechargeable Li-battery volume≥1,600mAh
• 4 hours of internal battery backup

Bubble Detector

• Ultrasonic wave detector
• Detection sensitivity ≥25μL

KVO Speed : 1ml/h---5ml/h (1ml/h step)
Power Consumption : 30VA

Operation Environment 

• Temperature 5--- 40 degree
• Relative Humidity 20---90%

Storage Environment

• Temperature -30----- 55 degree
• Humidity ≤95%
• Atmospheric Pressure 50.10KPa---106.0KPa

Infusion Set : Compatible with any brands
Forbidden : Not support blood Infusion
Dimension : 140mm(L) x 157mm(W) x 220mm(H)
Net Weight : 1.8kg

 

CONTENT OF BOX 

•  Infusion Pump 
• Operating Manual 
• Power Cord 

 
Warranty: 1 year

Product Details:

PRODUCT DESCRIPTION 
Beyond Infusion Pump BYS-820 has disposable infusion sets used with this product shall comply with the standards of GB 8368-2005 Infusion Sets for Single Use, Gravity Feed. The infusion sets which do not comply with the standards may lead to the incorrect infusion rate, incontrollable transfusion, tube breakage, etc. 
 FEATURES

• HD LCD Display, high capacity words, friendly user interface, dynamically display working status;
• Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents;
• Compatible with any brands of infusion sets after correct calibration;
• Preset solution volume to greatly reduce the workload of nurses;
• Work mode: ml/h and drop/min can switch freely;
• Three levels of occlusion: high, middle and low;
•  Purge function;
• KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 3ml/h;
• Power Source: AC100---240V, 50/60Hz; Internal Battery;
• Automatically record the settings of last infusion;
• BYS-820D can store 2000pcs of infusion records and it has a drug library.
• OEM is available.

APPLICATION / MODEL
This instrument is applied in internal medicine, surgical, pediatrics, obstetrics and gynecology, ICU, CCU, operation room and other clinical infusion treatment (but not suitable for blood transfusion). It is especially suitable for clinical treatment that needs long-time accurate control of infusion rate and supervision of infusion processes. PRODUCT SPECIFICATION 
 Model: BYS-820 & BYS-820D
Infusion Rate : 1ml/h---1200ml/h (1ml/h step)
Purge Rate : 100ml/h---1200ml/h (can be calibrated)
Rate Accuracy : within±5% (after correct calibration)
Volume Limit : 0ml---9999ml
Total Infusion Volume : 0---9999.9ml
Alarm Pressure

• High 800mmHg±200mmHg (106.7kPa±26.7kPa)
• Medium 500mmHg±100mmHg (66.7kPa±13.3kPa)
• Low 300mmHg±100mmHg (40.7kPa±13.3kPa)

Audible and Visible Alarm

• End of injection
• Occlusion
• Door open
• Bubbles in the tube
• Wrong setting
• Low battery
• AC power pulled out

Power Source

• 100---240Vac, 50/60Hz
• Internal rechargeable Li-battery volume≥1,600mAh
• 4 hours of internal battery backup

Bubble Detector

• Ultrasonic wave detector
• Detection sensitivity ≥25μL

KVO Speed : 1ml/h---5ml/h (1ml/h step)
Power Consumption : 30VA

Operation Environment 

• Temperature 5--- 40 degree
• Relative Humidity 20---90%

Storage Environment

• Temperature -30----- 55 degree
• Humidity ≤95%
• Atmospheric Pressure 50.10KPa---106.0KPa

Infusion Set : Compatible with any brands
Forbidden : Not support blood Infusion
Dimension : 140mm(L) x 157mm(W) x 220mm(H)
Net Weight : 1.8kg

 

CONTENT OF BOX 

•  Infusion Pump 
• Operating Manual 
• Power Cord 

 
Warranty: 1 year

Product Details:

Main Features
■ Display mode: 12' color TFT LCD with high-resolution.
■ Be applicable for adult, pediatric and neonatal for all-round monitoring.
■ Operation interface with Chinese and English. (Optional languages: French, German, Italian, Turkish, etc.)
■ Multiple display modes are optional, such as big characters interface.
■ Waveform and data colour can be set optionally.
■ Storage of 480-hour trend data, and review of 40-second holographic waveform.
■ 7-lead ECG displays in a screen, and ECG waveforms series display.
■ Anti-high frequency surgical unit, defibrillation-proof(requirement for special leads).
■ Adopt digital SpO2 technology, which has strong anti-interference and anti-weak filling capability.
■ Function of NIBP review, storage for up to 400 NIBP data.
■ Connect central monitoring station, other bed observation and software updating with wireless and wired mode.
■ Built-in SD card, U disk for storing data and U disk updating.
■ Support the functions of VGA video output and adjustable LCD backlight.
■ Support alarm with human voice body.
■ Function of synchronous signal output.

Product Details:

Product DescriptionYU300 is a compact, table-top oxygen generator for general use at home. It is used for relaxation, to recover from fatigue or exposure to high pollution. The LCD display and buttons on the top of the device allow for easy control of the device. It's flow rate ranges from 1 - 7LPM.

Product Details:

Infant radiant warmers are overhead heating units. A heat source, a skin-temperature sensor, an automatic (servo) control unit, and visual and aural alarms are usually included. They generate a large amount of radiant heat energy. They help limit conductive losses by enclosing the baby in a warm microenvironment.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Phototherapy is treatment with a special type of light (not sunlight). It's sometimes used to treat newborn jaundice by making it easier for your baby's liver to break down and remove the bilirubin from your baby's blood. Phototherapy aims to expose your baby's skin to as much light as possible.

Product Details:

Product Detail :

• Adopting oil-free piston pump
• Clean-without pollution of oil and smoke 
• Convenient-no need add oil to maintain daily
• Safe-no plus pressure during using
• No flow backwards pressure when the machine stops, so the liquid won’t flow backwards
• Complete plastic panels, hand-switch and foot-switch for operating easily. Select negative pressure at will with no level for pressure adjustment, and overflow protection mechanism, safe and reliable 
• Not suitable for continuous use in the induced abortions and for the inflammable or explodable surroundings.

Product Details:

Product Detail :

• Adopting oil-free piston pump
• Clean-without pollution of oil and smoke 
• Convenient-no need add oil to maintain daily
• Safe-no plus pressure during using
• No flow backwards pressure when the machine stops, so the liquid won’t flow backwards
• Complete plastic panels, hand-switch and foot-switch for operating easily. Select negative pressure at will with no level for pressure adjustment, and overflow protection mechanism, safe and reliable 
• Not suitable for continuous use in the induced abortions and for the inflammable or explodable surroundings.

Product Details:

Product Detail :

• Adopting oil-free piston pump
• Clean-without pollution of oil and smoke 
• Convenient-no need add oil to maintain daily
• Safe-no plus pressure during using
• No flow backwards pressure when the machine stops, so the liquid won’t flow backwards
• Complete plastic panels, hand-switch and foot-switch for operating easily. Select negative pressure at will with no level for pressure adjustment, and overflow protection mechanism, safe and reliable 
• Not suitable for continuous use in the induced abortions and for the inflammable or explodable surroundings.

Product Details:

Product Detail :

• Adopting oil-free piston pump
• Clean-without pollution of oil and smoke 
• Convenient-no need add oil to maintain daily
• Safe-no plus pressure during using
• No flow backwards pressure when the machine stops, so the liquid won’t flow backwards
• Complete plastic panels, hand-switch and foot-switch for operating easily. Select negative pressure at will with no level for pressure adjustment, and overflow protection mechanism, safe and reliable 
• Not suitable for continuous use in the induced abortions and for the inflammable or explodable surroundings.

Product Details:

Packaging Details 

• Paperboard is a paper-based material that is lightweight, yet strong. It can be easily cut and manipulated to create custom shapes and structures. These characteristics make it ideal to be used in personalized packaging. It is made by turning fibrous materials that come from wood or from recycled waste paper into pulp, and then bleaching it. Paperboard packaging comes in various grades, each suitable for different packaging requirements.

Silent Features :

Easy To Use
As technology advanced, we have kept the Warmer simple & easy to use with touch controls.

Focused Heating
The heater with reflector makes it easier to work with the baby by efficiently providing even heat distribution across the cradle and not into the surrounding environment.

Air Control Mode
Air control is an electronic feedback system which functions as a thermostat to maintain a constant temperature of baby cradle by regulating the heat output of Radiant Warmer. It Also acts as a WATCH DOG as Air over temperature cuts off heater even if the Warmer is operating in servo mode.

Manual Mode
The Manual mode allows the Warmer to be kept ready without nuisance alarms. When needed the Warmer provides safe, powerful & controlled warming to restore the temperature drop experienced by the baby immediately after delivery.

Servo Control Mode
Servo control is an electronic feedback system which functions as a thermostat a constant temperature at the site of skin probe by regulating the heat output of Radiant Warmer maintaining a constant abdominal Skin temperature between 36.5 & 37.0 C is the simplest way to provide a "Thermoneutral environment, minimizing the no. of calories needed to maintain normal body temperature & reducing the risks of cold stress or overheating. Servo control is the only acceptable method of heat regulation for the infant cared for under a Radiant Warmer.

Infant Warmer(Skin/Manual)

• Skin temperature displayed on 1 "bright Red LED display".
• Set temperature displayed on separate bright red LED display.
• Two modes of warming I.e. Skin, Air & Manual.
• Heater output in 10 equal steps in percentage.
• Programmable Heater power &Time in Manual mode.
• Individual LED for selection for mode (Skin, Air& Manual).

Additional Features :

• APGAR timer / attend baby alarm
• Programmble Mute Time

Product Details:

Mild Steel Neonatal Phototherapy Unit for Hospital

Product Details:

• With CE Certificate, meets EU clinical safety Requirement
• Large 8.4" LCD color touchscreen, monitoring of waveforms and parameters in different colors
• IPPV, Pressure and SIMV modes can easily meet clinical requirements
• 4/6 tubes of flowmeters for 2/3 - gas sources and suitable for various operation requirements
• Spirometery loops, for easier interpretation of ventilation effectiveness
• Optional multi-gas monitoring provides more reference for anesthesia
• Optional AGSS provides more protection

Product Details:

Product Description

• 7" Color Display with built in printer
• Charging time 6 sec on mains
• Offers variable energy level selection. (2,3,5,7,10,20,30,50,70,100,150,200 Joules)
• Battery capacity - 70 - 100 shocks on single charge.
• Adult pediatric paddles support.
• Compact Light weight.
• Printer 2”